Epiphan VGA Printer User Manual download pdf (Page 68)

5. Advanced Printer Configuration Selecting the Default Printer

Page 68 Epiphan VGA Printer

7 Select VGA Printer Config to display the Web admin

interface.

8 Check the Configure VGA Printer section. If the message

Error: printer is not configured! appears, you must add a new

printer or set one of the already added printers to be the

default printer.

• To add a new printer, see “Adding Printers” on page 27 or

“Adding a Printer That the VGA Printer Device Cannot

Find Automatically” on page 57.

• To set a printer to be the default printer, see “Selecting the

Default Printer”.

Selecting the Default Printer

If you have added more than one printer, you may need to

change the printer that the VGA Printer device prints to. You

change the printer by making the printer that you want the VGA

Printer device to print to the default printer.

Also, if you delete the printer that the VGA Printer device was

printing to, you may need to select a default printer.

Note: You don’t always have to select a default printer. Setting

the default printer is available if you want to change the printer

that the VGA Printer device prints to, or if Configure VGA

Printer displays the message Error: printer is not configured!.

Only one printer can be the default printer. If the default printer is

turned off or disconnected, print jobs are stored in that printer’s

print queue. You can either move those print jobs to another

printer, or the stored print jobs will be printed when the printer is

connected or turned on again. You may have to start the print

jobs manually, see “Controlling Print Jobs” on page 70).

To change the default printer

1 Log into the Web admin interface.

2 Scroll down to the Configure VGA Printer section.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 85 86

No comments

Epiphan VGA Printer User Manual Page 68