Epiphan VGA Printer User Manual download pdf (Page 18)

2. Installation and Getting Started Logging Into the VGA Printer Web admin interface

Page 18 Epiphan VGA Printer

Logging Into the VGA Printer Web

admin interface

You use the VGA Printer Web admin interface to configure the

VGA Printer device. Log into the VGA Printer Web admin

interface from any web browser. Before you log into the Web

admin interface you need to determine the IP address of the VGA

Printer device.

Note: You can always log into the VGA Printer Web admin

interface by browsing to the default VGA Printer IP address,

which is http://192.168.255.250. To log into the VGA Printer

device using this IP address you must change your PC to use the

static IP address 192.168.255.249 and netmask 255.255.255.252.

Then open a Web browser and browse to http://192.168.255.250.

If the Network has a DHCP Server

The VGA Printer device can get network settings automatically if

the network has a DHCP server. After connecting the VGA

Printer device to the ethernet network, you can use the Network

Discovery Utility or check the DHCP server logs to determine the

IP address given to the VGA Printer device.

To log into the VGA Printer Web admin interface

1 Start a web browser on a PC connected to the same network as

the VGA Printer device.

2 Browse to:

http://<VGA_Printer_IP_address>

3 Enter the following:

User Name: admin

Password: (no password required)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 85 86

No comments

Epiphan VGA Printer User Manual Page 18