Epiphan VGA Printer User Manual download pdf (Page 17)

2. Installation and Getting StartedUsing the Network Discovery Utility to Find the IP Address of

User Guide Page 17

3 Run NetworkDiscovery.exe.

4 Select Search to find the Epiphan devices connected to the

network.

Note: The Network Discovery Utility can only find the Epiphan

devices on the same network as the Windows PC.

If the

VGA Printer device

is operating, has received an IP address

from a DHCP server, and is connected to the network, the

Network Discovery Utility should find it and it should appear on

the Network Discovery Utility display. The Network Discovery

Utility also displays the

VGA Printer

IP address.

You can use this IP address to connect to the Web admin

interface. You can also select Web config to connect to the Web

admin interface.

If the

VGA Printer device

is capturing images, its status should be

Device OK shown with a green indicator.

Note: When you restart the Network Discovery Utility and if it

has already found an Epiphan device, it will show the status as

Detecting and the indicator will be amber. The DHCP server may

have assigned a new IP address; therefore, always select Search

after starting the Network Discovery Utility.

If the Network Discovery Utility cannot find the

VGA Printer

device

, make sure the device is turned on and check the network

connections. If you find and correct the problem, select Search to

refresh the list of devices.

If you still cannot see the

VGA Printer device

, it may not have

gotten an IP address from the DHCP server. Use the information

in “Changing the VGA Printer IP Address” on page 22 to log into

the Web admin interface and manually change the VGA Printer

IP address.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 85 86

No comments

Epiphan VGA Printer User Manual Page 17